Comparing Basic Installation Versus Continental Siding Installation

Two Siding Bids, Two Very Different Numbers

Get two companies to bid on siding for the same house and you’ll likely get very different quotes, even if the samples on the table look about the same. It’s mostly down to how the siding installation actually goes up once the crew is up on the ladder.

The parts you can’t see behind the finished panels can decide how your home’s exterior looks in ten years. So here’s how a standard install works and how we do it at Continental Siding.

Standard Siding Installation, Easily Explained

Most of the industry runs on volume, and that shapes everything. Panels show up pre-cut in standard lengths, so they overlap every few feet and leave a row of seams across your exterior. Seams are standard, but each one is a little joint that swells and shrinks with the temperature, and given a few years, it gives rain a spot to slip behind.

The crew is made up of siding installers hired job by job. Plenty of subcontractors do careful work, but the company that signed your contract doesn’t always control who pulls into your driveway or how they were trained. And you usually put money down before the first panel goes up, with more due as the job rolls along.

None of that is a knock on the approach. It’s simply how high-volume work keeps calendars full and prices predictable, and it’s roughly what a typical bid describes. But at Continental Siding we think there are other ways to approach siding installation.

Where Our Siding Installation Changes Your Home

Our process starts a step earlier than most. We measure your exterior and cut our seamless polymer siding to fit right there on-site, so a single run stretches the full length with no seam breaking it up halfway. What you get is one smooth, unbroken surface.

Under that surface is our patented Perma-Strate Wall System. It secures each panel to the house but still lets the material stretch and shrink through a Missouri August and a January cold snap.

Who’s On Your Job, and Who You Call

The people at your house are our own trained technicians, not a crew rounded up for the week. One project manager stays on your job from the first measurement to the final walk-through, so there’s always a name you know when you have a question. It’s the kind of thing that doesn’t show up anywhere on a quote, but the kind you notice every day once the work starts.

This matters after your project, too. Because we manufacture the siding ourselves in Missouri and Kansas and install it with our own people, the product, the workmanship, and the warranty are all under one roof. There’s no gap where a manufacturer points at the installer or the installer points at the panel. We’re responsible for the quality of our work.

When You Pay

Another easy comparison is that you pay us when the job is done, not before. No big deposit sits in our account while you wait, which puts the pressure to finish squarely on us. Look at how different siding installation companies handle payment and you learn a lot about this team’s confidence in their craftsmanship.

What It Adds Up To

Line those pieces up and it’s a simple story: American-made siding, backed by the company who built it and hung it on your house. That’s what leaves our customers feeling the Confidence, Pride, and Peace of Mind they deserve.

So when you’re weighing one quote against another, look past the sticker and ask what’s behind it. How is the material made, cut, and fitted? Who installs it, and were they trained by the company you chose? Who answers the phone if something needs attention down the road? Experienced siding installation companies can tell you immediately, and will happily walk you through the answers. That’s usually where the right choice sorts itself out.

When you’d like to see real numbers for your home, request a FREE price quote. We’ll walk your home with you, explain exactly what we’d do, and put every detail in writing.